15in 4-Drawer Base Cabinet Carcass (Frameless)
from Rogue Engineer
Size not listed
- Size unknown
- Free
- Cut list
Tall Chest of Drawers
from Kreg Tool Projects
- Size unknown
- Free
A tall chest of drawers built from plywood case sides with pocket-hole joinery, a curved-leg base, and six drawers on full-extension slides.
Cut two Case Sides to size from 3/4" plywood, as shown in the cutting diagram. Using a router and a 1/4" rabbeting bit, create rabbet along the inside rear edge of each Case Side, as shown.
Plan facts
- Size
- Not listed
- Skill
- Intermediate
- Tools
- pocket-hole-jig, router, jigsaw, drill, clamps
- Materials
- 3/4 inch plywood, 1/4 inch plywood, 1/2 inch plywood, 1x3 board, 1x4 board, 1x2 board, 1x8 board, 1 1/4 inch pocket-hole screws, 2 inch flat-head wood screws, 3/4 x 3/4 inch cove molding, brad nails, 16 inch full-extension drawer slides, double sided carpet tape
- Estimated cost
- Not listed Materials, not plan price.
- Cut list
- No
- Price
- Free
