DIY Chicken Wire Bulletin Board
from Rogue Engineer
Size not listed
- Size unknown
- Free
- Cut list
Simple Tray with Rope Handles
from Kreg Tool Projects
- Free
- Cut list
A beginner-friendly serving tray built from 1x4 and 1x3 boards with pocket-hole joinery and drilled rope handles.
Great plan for the novice woodworker or DIYer! This little serving/display tray is easy to make, requires only a few hours, and the materials are very inexpensive.
Plan facts
- Size
- 19.5 × 12 × 2.5 in (50 × 30 × 6 cm)
- Skill
- Beginner
- Tools
- miter-saw, table-saw, drill, pocket-hole-jig, countersink-bit, clamps, hammer
- Materials
- 1x4 pine boards, 1x3 boards, 1 1/4 inch pocket hole screws, 1 1/4 inch wood screws, 1 1/4 inch brad nails, 3/8 inch dowel, 3/8 inch rope, wood glue, pocket hole plugs, woodfiller
- Estimated cost
- Not listed Materials, not plan price.
- Cut list
- Yes
- Price
- Free
Report a problem
Similar plans
Floating Nightstand Plans
from Bourbon Moth Woodworking
19 × 22 × 15 in (48 × 56 × 38 cm)
- Paid · $15
Outdoor Serving Cart | Bar Cart | Grill Cart Build Plans
from DIY Montreal
20.5 × 36.5 × 32 in (52 × 92 × 81 cm)
- Paid · $9
- Cut list
Brick Pattern End Grain Cutting Board
from DIY Montreal
Size not listed
- Size unknown
- Paid · $7
- Cut list