DIY Storage Bench: How to Build One with a Sliding Seat
from Rogue Engineer
46 × 18 × 17 in (117 × 46 × 43 cm)
- Free
- Cut list
DIY Upholstered X-Bench
from Rogue Engineer
- Size unknown
- Free
- Cut list
A beginner-friendly upholstered X-shaped bench built from 1x2 framing, with a foam and fabric seat finished with upholstery nails.
It’s the ladies turn on this upholstered X bench! Besides my Chicken wire Bulletin Board I have ZERO experience building.
Plan facts
- Size
- Not listed
- Skill
- Intermediate
- Tools
- pocket-hole-jig, drill, miter-saw, brad-nailer, hammer, staple-gun, tape-measure, pencil, safety-glasses, hearing-protection
- Materials
- 1x2x48 lumber, 1x2x96 lumber (3), 3/4 inch plywood 17x22 inch, 3 inch foam padding, Batting, Fabric, Spray adhesive, 1-1/4 inch brad nails, 1-1/4 inch wood screws, Wood glue, Upholstery tacks
- Estimated cost
- Not listed Materials, not plan price.
- Cut list
- Yes
- Price
- Free
