15in 4-Drawer Base Cabinet Carcass (Frameless)
from Rogue Engineer
Size not listed
- Size unknown
- Free
- Cut list
DIY TV Stand
from Kreg Tool Projects
- Size unknown
- Free
A step-by-step Kreg project for a plywood TV stand with aluminum angle legs, built with pocket hole joinery and finished after a test assembly.
The assembly of this project is a little different than we normally use. For this one, it's best to make all of the parts first, and then do an initial assembly.
Plan facts
- Size
- Not listed
- Skill
- Intermediate
- Tools
- miter-saw, circular-saw, jigsaw, pocket-hole-jig, drill, forstner-bit, clamps
- Materials
- 3/4 inch oak veneer plywood, iron-on veneer edge banding, 1/8 x 2 inch aluminum angle, 1 1/4 inch coarse-thread pocket hole screws, #10 x 1 inch pan-head wood screws, black gel stain, water-based finish
- Estimated cost
- Not listed Materials, not plan price.
- Cut list
- No
- Price
- Free
