15in 4-Drawer Base Cabinet Carcass (Frameless)
from Rogue Engineer
Size not listed
- Size unknown
- Free
- Cut list
DIY Bedside Table with Drawer and Shelf
from Rogue Engineer
- Size unknown
- Paid
- Video
A plywood and pine bedside table with a full-extension drawer and lower shelf, built with pocket-hole joinery.
A bedside table has a simple job — hold the lamp, the book, and the phone — but the store-bought ones that do it with any style cost several times the lumber bill on this one. This build gives you a proper drawer on full-extension slides and a shelf below, from half a sheet of plywood and a handful
Plan facts
- Size
- Not listed
- Skill
- Beginner
- Tools
- circular-saw, pocket-hole-jig, tape-measure, pencil, drill
- Materials
- 3/4 inch plywood half sheet, 1/4 inch plywood quarter sheet, 1x12 pine board 72 inches, 2x2 pine boards 8 ft, 1x2 pine boards 8 ft, 1x4 pine board 8 ft, full-extension drawer slides, drawer knob, 1-1/4 inch pocket screws, wood glue, brad nails, drawer front trim
- Estimated cost
- Not listed Materials, not plan price.
- Cut list
- No
- Price
- Paid
